Proposal for energy saving
Significant reduction in electricity charges!
Replacing fluorescent lights with LEDs can reduce your electricity bill by about 60%.
The earlier the introduction, the greater the saving effect.
The earlier the introduction, the greater the saving effect.
Work efficiency is improved by the LED with dimming function!
The brightness and color of the CV21 LED can be adjusted according to the work environment.
"The introduction of LEDs has made warehouse cargo handling and clerical work easier."customer feedback
"The introduction of LEDs has made warehouse cargo handling and clerical work easier."customer feedback
I have received.
LED with motion sensor saves even more!
It detects a person and turns on automatically, and turns off automatically when there are no more people.
Recommended for corridors, etc.
Recommended for corridors, etc.
Save a lot of initial costs!
Since it can be attached to existing fluorescent light fixtures with simple electrical work, installation costs can be reduced.can suppress
can.In addition, by utilizing installment sales, leasing, etc.,A lot of initial investment amountsave money.
Please contact us by all means.
LED and fluorescent cost simulation
Product Introduction
Benefits of introducing LED lighting
Power consumption can be significantly reduced
In general, the power consumption of LED lighting is reduced by 40 to 60% compared to fluorescent lighting.This also contributes greatly to the reduction of CO2 and plays a major role in preventing global warming.
In general, the power consumption of LED lighting is reduced by 40 to 60% compared to fluorescent lighting.This also contributes greatly to the reduction of CO2 and plays a major role in preventing global warming.
fulfill.
Eco-friendly lighting that does not use mercury
Since LED lighting does not use the mercury contained in fluorescent lamps, it can be said to be environmentally friendly lighting.Also, because the arc tube is polycarbonate,
Since LED lighting does not use the mercury contained in fluorescent lamps, it can be said to be environmentally friendly lighting.Also, because the arc tube is polycarbonate,
Even if it breaks, the glass will not scatter.
Long life of 40,000 hours
The expected life of fluorescent lamps is said to be 6,000 to 12,000 hours, but LED lighting
The expected life of fluorescent lamps is said to be 6,000 to 12,000 hours, but LED lighting
The expected life of the light source is 4 hours, which is much longer.This greatly reduces the frequency of lighting replacement.
Less fever
LED lighting is a light source that does not generate much heat, and compared to lighting such as fluorescent lamps, it can be expected to suppress the rise in indoor temperature and improve the efficiency of air conditioning.
LED lighting is a light source that does not generate much heat, and compared to lighting such as fluorescent lamps, it can be expected to suppress the rise in indoor temperature and improve the efficiency of air conditioning.
There is little ultraviolet light
Since the light from LED lighting contains less ultraviolet rays that cause sunburn, it is less likely to fade or deteriorate even when irradiated to works of art, and it is also possible to prevent insects that are attracted to the ultraviolet rays from flying in.
Since the light from LED lighting contains less ultraviolet rays that cause sunburn, it is less likely to fade or deteriorate even when irradiated to works of art, and it is also possible to prevent insects that are attracted to the ultraviolet rays from flying in.
No ballast required
Since LED lighting uses a power supply dedicated to LEDs, a ballast for fluorescent lamps is not required to light the LEDs. In addition, ballasts that have exceeded their lifespan may increase power consumption or cause an accident.
Since LED lighting uses a power supply dedicated to LEDs, a ballast for fluorescent lamps is not required to light the LEDs. In addition, ballasts that have exceeded their lifespan may increase power consumption or cause an accident.
Features of straight tube LED lighting / CVL series
Industry-leading high efficiency! Power consumption14.8w, Bright enough
If you replace the 40-inch fluorescent lamp (40W) with our LED (14.8W),About 60%reduce power usage.Brightness equivalent to a 40-inch fluorescent lamp2,149lm(Lumen).
The initial cost can be reducedNo need to replace equipmentType
Since the CVL series is a G13 base type, it can be attached to the fluorescent lamp equipment you are using with simple construction. (If the device is very painful, it may not be possible to install it.)
Long life40,000 hours(Expected life of light source), and more secureProduct warranty 3 years
It lasts about 10,000 times longer than the expected life of fluorescent lamps (about 4 hours). The frequency of lamp replacement is greatly reduced. For general usage time, the payback period is less than 3 years. You can rest assured with a 3-year product warranty.
If you replace the 40-inch fluorescent lamp (40W) with our LED (14.8W),About 60%reduce power usage.Brightness equivalent to a 40-inch fluorescent lamp2,149lm(Lumen).
The initial cost can be reducedNo need to replace equipmentType
Since the CVL series is a G13 base type, it can be attached to the fluorescent lamp equipment you are using with simple construction. (If the device is very painful, it may not be possible to install it.)
Long life40,000 hours(Expected life of light source), and more secureProduct warranty 3 years
It lasts about 10,000 times longer than the expected life of fluorescent lamps (about 4 hours). The frequency of lamp replacement is greatly reduced. For general usage time, the payback period is less than 3 years. You can rest assured with a 3-year product warranty.
Why don't you save electricity and power cost for eco2 with LED lighting of CVL series?
Reliable quality control system
All LED lighting "CLV series" are inspected at the CV21 Kyoto factory. A serial number can be printed on the accepted products for tracking management.
We guarantee the quality for 3 years, so you can use it with confidence.
We guarantee the quality for 3 years, so you can use it with confidence.
Characteristic lineup of CVL series
Straight tube type LED popular type
LED lamps can be installed using existing lighting fixtures.
With a G13 base and a slim shape with a tube diameter of 30 mm, not only general fluorescent lamps (FL, FLR) but also Hf fluorescent lamps can be replaced with LEDs without changing the equipment you are using.
*When installing this LED lamp on an existing fixture, it is necessary to investigate the condition of the existing fixture in advance.
With a G13 base and a slim shape with a tube diameter of 30 mm, not only general fluorescent lamps (FL, FLR) but also Hf fluorescent lamps can be replaced with LEDs without changing the equipment you are using.
*When installing this LED lamp on an existing fixture, it is necessary to investigate the condition of the existing fixture in advance.
Power consumption can be significantly reduced by about 40% of fluorescent lamps.
Model | Input voltage (V) | Power (W) | Total luminous flux (Lm) | Luminous efficiency (Lm / W) | Color temperature (K) | Color rendering (Ra) | life (time) | |
CVL20T110 | 20 type Equivalent | AC90~ 240 | 9.6 | 1,092 | 114 | 5,000 | 82.0 | 40,000 |
CVL40T120 | 40 type Equivalent | AC90~ 240 | 17.8 | 2,136 | 120 | 5,000 | 82.0 | 40,000 |
CVL40 T45A50 | 40 type Equivalent | AC90~ 240 | 14.8 | 2,149 | 145 | 5,000 | 83.7 | 40,000 |
Straight tube type LED 3-stage dimming type
Even after replacement according to needs
You can dim the light on the spot.
For example, you can reduce the brightness near the window to save power, and increase the brightness in a room without windows. By switching the switch according to the needs of the place, you can adjust the light in 3 steps on the spot.
For example, you can reduce the brightness near the window to save power, and increase the brightness in a room without windows. By switching the switch according to the needs of the place, you can adjust the light in 3 steps on the spot.
Model | input Voltage (V) | Power (W) | Total luminous flux (Lm) | Luminous efficiency (Lm / W) | Color temperature (K) | Color rendering (Ra) | life (time) | Dimming (※ 1) | |
CVL40 T145S3 | Equivalent to 40 type | AC90 ~240 | 18.8 | 2,632 | 140 | 5,000 | 82.0 | 40,000 | H |
14.8 | 2,146 | 145 | M | ||||||
11.8 | 1,711 | L | |||||||
CVL40 T175S3 | Equivalent to 40 type | AC90 ~240 | 15.5 | 2,635 | 170 | 5,000 | 82.0 | 40,000 | H |
12.3 | 2,152 | 175 | M | ||||||
9.8 | 1,722 | L | |||||||
CVL110 T145S3 | 110Equivalent to shape | AC90 ~240 | 49.0 | 6,860 | 140 | 5,000 | 82.0 | 40,000 | H |
39.0 | 5,655 | 145 | M | ||||||
29.0 | 4,205 | L |
*1 H: High illuminance mode, M: Standard lighting mode, L: Low power consumption lighting mode
Straight tube type LED color temperature / luminous flux switching type
Offices and stores will change.
The color tone and light intensity of the lamp can be adjusted freely!
If you use the dedicated remote control, you can adjust the color tone of the lamp from daylight color to light bulb color according to your preference, and you can freely switch the light intensity (total luminous flux) between 2,700 lm and 550 lm.
*Remote control is sold separately.
If you use the dedicated remote control, you can adjust the color tone of the lamp from daylight color to light bulb color according to your preference, and you can freely switch the light intensity (total luminous flux) between 2,700 lm and 550 lm.
*Remote control is sold separately.
If you set your channel
You can adjust multiple books at once.
If you use the channel setting function of the dedicated remote controller, you can divide multiple straight tube LEDs into up to 4 groups and register them in groups, and you can adjust the color tone and light intensity as a whole or in groups.
If you use the channel setting function of the dedicated remote controller, you can divide multiple straight tube LEDs into up to 4 groups and register them in groups, and you can adjust the color tone and light intensity as a whole or in groups.
Model | Input voltage (V) | Power (W) | Total luminous flux (Lm) | Luminous efficiency (Lm / W) | Color temperature (K) | life (time) | |
CVL40TUSP | 40 type Equivalent | AC90~ 240 | 22.0 | 2,700 | 122 | 2,700 to 6,500 | 40,000 |
19.5 | 2,383 | 122 | 2,700 to 6,500 | ||||
17.0 | 2,077 | 122 | 2,700 to 6,500 | ||||
14.5 | 1,772 | 122 | 2,700 to 6,500 | ||||
12.0 | 1,466 | 122 | 2,700 to 6,500 | ||||
9.5 | 1,160 | 122 | 2,700 to 6,500 | ||||
7.0 | 855 | 122 | 2,700 to 6,500 | ||||
4.5 | 550 | 122 | 2,700 to 6,500 |
*2: The total luminous flux is a guide. It depends on the color temperature.
Straight tube type LED with motion sensor
A sensor detects human movement and
Turns on and off automatically.
When the motion sensor built into the LED lamp detects a person within the sensing range (height 3m, diameter 5m), the lamp automatically lights up. Also, if there is no person within the sensing range after the set lighting time has passed, the lamp will automatically turn off.
When the motion sensor built into the LED lamp detects a person within the sensing range (height 3m, diameter 5m), the lamp automatically lights up. Also, if there is no person within the sensing range after the set lighting time has passed, the lamp will automatically turn off.
With the changeover switch, you can select lighting time and complete extinguishing or 10% luminous flux
Straight tube type LED motion sensor type / installation example
Corridor
backyard
Bathroom
Model | Input voltage (V) | Power (W) | Total luminous flux (Lm) | Luminous efficiency (Lm / W) | Color temperature (K) | Color rendering (Ra) | life (time) | |
CVL20 T100J4 | 20 type Equivalent | AC90~ 240 | 10.0 | 1,000 | 100 | 5,000 | 82.0 | 40,000 |
CVL40 T120J4 | 40 type Equivalent | AC90~ 240 | 17.8 | 2,136 | 120 | 5,000 | 82.0 | 40,000 |
LED base light GB1 series
Slim & thin design
Slim and industry-leading thinness (38mm)
Slim and industry-leading thinness (38mm)
It is the base light of the design.
Although the light source, power supply, and mounting part are integrated, the weight of the main unit is kept to 1 kg or less (GB1 series), making it easy to use.
I can handle it.
Low frequency noise
Realizes low noise and high efficiency. All models of the GB1 series have cleared the CISPR15 standard, so they can be used safely in data centers, etc.
Realizes low noise and high efficiency. All models of the GB1 series have cleared the CISPR15 standard, so they can be used safely in data centers, etc.
Long life 60,000 hours
The long-life design makes it ideal for places where maintenance is difficult.
* Expected life of the light source when the average ambient temperature is 30 ° C
The long-life design makes it ideal for places where maintenance is difficult.
* Expected life of the light source when the average ambient temperature is 30 ° C
Easy to install
A slide cover mechanism is used for the mounting part.The main body can be held with one hand and can be installed by one person.
*Electrician qualification is required.
A slide cover mechanism is used for the mounting part.The main body can be held with one hand and can be installed by one person.
*Electrician qualification is required.
GB-1 series / outline drawing
Model | Input voltage (V) | Power (W) | Total luminous flux (Lm) | Luminous efficiency (Lm / W) | Color temperature (K) | Color rendering (Ra) | life (time) | |
GB100258 NSA | 40 type Equivalent to 1 lamp | AC100 ~242 | 18.8 | 2,150 | 114 | 5,000 | 85.0 | 60,000 |
GB101756 NSA | 40 type Equivalent to 2 lamp | AC100 ~242 | 39.0 | 4,000 | 102 | 5,000 | 85.0 | 60,000 |
GB102158 NSA | 40 type Equivalent to 2 lamp | AC100 ~242 | 40.0 | 5,500 | 137 | 5,000 | 85.0 | 60,000 |
GB101358 NSA | 40 type Equivalent to 2 lamp | AC100 ~242 | 34.2 | 5,250 | 153 | 5,000 | 85.0 | 60,000 |
GB110258 NSA | 110 type Equivalent to 1 lamp | AC100 ~242 | 40.3 | 5,400 | 134 | 5,000 | 85.0 | 60,000 |
GB110758 NSA | 110 type Equivalent to 2 lamp | AC100 ~242 | 68.4 | 10,550 | 154 | 5,000 | 85.0 | 60,000 |
*LED base light GB-1 series is a product of Sanken Electric Co., Ltd.
Compliant standards / precautions
Compliant standard
Precautions when installing LEDs
- Do not connect to a three-phase power supply.
- In factories with large inductive loads, it is recommended to install a noise filter with a power supply to prevent malfunction of the LED straight tube.
- Power consumption varies slightly depending on the usage environment.In addition, brightness, There is some variation in light color.
- Expected life means the expected life in an environment with an average ambient temperature of 30 ° C.
- Specifications are subject to change without notice due to improvements. Please note.
- In addition to the products listed in this catalog, we also handle various LED lighting fixtures.Please contact the person in charge for details.
Precautions when connecting to existing fluorescent lighting fixtures
1.For glow type, be sure to remove the glow before use.
2.Existing fixtures have built-in ballasts to smoothen the start-up of fluorescent tubes.
3.Ballasts have a lifespan, and generally one that has been used for more than 30,000 hours
Performance deteriorates with deterioration.may decrease.
4.Ballasts themselves also consume power, and old ballasts can lead to fire.
Because there isDisconnect the ballast circuit before use.
5.Please refer to the diagram below for disconnecting the ballast circuit.
○ ── ○ ・ ・ ・ Wiring connection work × ・ ・ ・ New line construction
Note) Power to the LED lamp is supplied from both ends of the socket.
LED lighting straight tube lamp, base light general catalog download
LED lighting general catalog (17671KB) |